Assa Abloy TRAKA32, Руководство пользователя

Страница: 204 / 919

V3.5 14/08/19 UD0089 Page 204
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.6.3 ADDING / REPLACING IFOBS USING A DESKTOP PROGRAMMER
NOTE: If your system is set up as Random Return to Multiple Systems, the process for replacing an iFob is
different to the procedure shown here. Refer to the section Replacing iFobs in Random Return to Multiple
Systems .
Most Traka Systems work on fixed iFob replacement basis which means the iFobs must be returned to the position
from where they were taken. By default the system will not know where an iFob should go therefore the iFob serial
number must be assigned to the position in the system and the Traka32 software.
1. Insert the iFob into the desktop programmer.
2. The quickest way to add a new iFob into a system is from the System Viewer.
3. From the main screen select the system from the drop down in the main toolbar, and from the system viewer
right click over the picture of the relevant position and click on Edit iFob Details.
NOTE: It is very important to ensure that the correct System and Position is selected for the iFob
you are about to assign using the desktop programmer.
4. The selected iFob record will open.
5. Click on the button highlighted below. Traka32 will communicate to the desktop programmer and read the
iFobs serial number.