Assa Abloy TRAKA32, Руководство пользователя

Страница: 469 / 919

V3.5 14/08/19 UD0089 Page 469
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
Enabled Access Control
Select this option if the Immobilisor is used for Access Control.
Select this option if the iFob does not remain in the receptor socket for operation of the device
e.g. where an iFob is "touched" to open a door. If enabled an event is recorded in the iFob
before activating the device, this prevents the user from removing the iFob too quickly and
losing the event. In this mode the standby LED is Solid Red so as there is as little time as
possible before activation.
1 x System Authoriser
Select this option two Valid User iFobs are required to be inserted into the receptor socket to
activate the ignition. A "request activation" event is logged in the first valid User iFob inserted.
This must then be removed within 5 seconds. A "Device Activated" event is logged in the
second Valid User iFob to be inserted within the next 5 seconds.
Enabled Daylight Saving (GMT)
Select this option to enable the real time clock to automatically update in accordance with
U.K. GMT.
Seat Switch
Enable Seat Switch
Select this option if the Immobilisor is fitted with a Seat Switch module.
Programmable Seat Switch Delay
Set the Seat Switch Delay to the amount of time the driver must be away from the truck (i.e.
not sitting on the seat) before the Immobilisor will automatically log an event and cut out the
Ignition.
Disable iFob Upon Seat Switch Timeout
Select this option if upon the timeout of the Seat Switch Delay the Immobilisor will disable the
iFob from being used again until returned to the Traka Cabinet.