1-800-810-WIRE • www.sargentlock.com • A8185A 10
Copyright © 2016, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
04/30/16
IN120 Exit Device
NOTE: For exterior applications, use ET gasket (52-0263) to seal
between ET escutcheon and outside door surface.
A. Connect motor harness adapter to chassis harness connector (Fig. 4A).
B. For wood doors: Route ET wire harness connector through the cylinder hole,
up and through the wire run channel to the controller cutout.
For metal doors: Route ET wire harness through the cylinder hole out the
controller cutout.
C. Pass top ET trim mounting post through chassis harness ground lug.
D. Ensure ET spindle engages the lower hub of the exit chassis.
4 Mount Exit Trim (ET)
Inside of Door
Fig. 4B
Outside of Door
Fig. 4A
A
B
C
D
