383
| Hotspot Profiles
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Parameter
Description
group-frame-block
Enable this parameter if you want to stop the IAP from sending forward downstream
group-addressed frames.
hessid
Specify a Homogenous Extended Service Set Identifier (HESSID) in a hexadecimal format
separated by colons.
internet
Specify this parameter to allow the IAP to send an Information Element (IE) indicating that
the network allows Internet access.
p2p-cross-connect
Specify this parameter to advertise support for P2P cross-connections.
p2p-dev-mgmt
Specify this parameter to advertise support for P2P device management.
pame-bi
Specify this parameter to enable Pre-Association Message Exchange BSSID Independent
(PAME-BI) bit, with which the IAP can indicate that the Advertisement Server can return a
query response independent of the BSSID used in the GAS Frame exchange.
query-response-
length-limit
Specify this parameter to set the maximum length of the GAS query response, in octets.
You can specify a value within the range of 1–127. The default value is 127.
roam-cons-len-1
roam-cons-len-2
roam-cons-len-3
Specify the length of the organization identifier (OI). That is, the value for the length of OIs
of
roam-cons-len-1
,
roam-cons-len-2
, or
roam-cons-len-3
. The roaming consortium OI is
based on the following parameters:
l
0
: Zero Octets in the OI (Null)
l
3
: OI length is 24-bits (3 Octets)
l
5
: OI length is 36-bits (5 Octets)
venue-group
Specify one of the following venue groups
l
unspecified
l
assembly
l
business
l
educational
l
factory-and-industrial
l
institutional
l
mercantile
l
outdoor
l
residential
l
storage
l
utility-misc
l
vehicular
By default, the business venue group is used.
venue-type
Specify a venue type to be advertised in the ANQP IEs from IAPs associated with this
hotspot profile. For more information about the supported venue types for each venue
group, see
Table 81:
Hotspot Profile Configuration Parameters