IAP Platform
ArubaOS Release
Instant Release
IAP-224/225
ArubaOS 6.3.1.1 or later
versions
Instant 4.0 or later versions
RAP-155/155P
ArubaOS 6.3.0 or later
versions
Instant 3.3 or later versions
RAP-108/109
ArubaOS 6.2.0.0 or later
versions
Instant 3.2 or later versions
To convert an IAP to a Remote AP:
1. Click
Maintenance
in the Instant main window.
2. Click the
Convert
tab. The
Convert
tab contents are displayed.
Figure 106
Maintenance—Convert Tab
3. Select
Remote APs managed by a Mobility Controller
from the drop-down list.
4. Enter the host name (fully qualified domain name) or the IP address of the controller in the
Hostname or
IP Address of Mobility Controller
text box. Contact your local network administrator to obtain the IP
address.
Ensure that the Mobility Controller IP address is reachable by the IAPs.
5. Click
Convert Now
to complete the conversion. The IAP reboots and begins operating in the Remote AP
mode.
6. After conversion, the IAP is managed by the mobility controller.
For IAPs to function as Remote APs, configure the IAP in the Remote AP whitelist and enable the FTP service
on the controller.
If the VPN setup fails and an error message is displayed, click
OK
, copy the error logs, and share them with
your local administrator.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
IAP Maintenance |
356
