In the Instant UI
To configure a TFTP server:
1. In the Instant main window, click the
System
link.
2. Click
Show advanced options
to display the advanced options.
3. Click the
Monitoring
tab.
4. Enter the IP address of the TFTP server in the
TFTP Dump Server
text box.
5. Click
OK
.
In the CLI
To configure a TFTP server:
(Instant AP)(config)# tftp-dump-server <IP-address>
(Instant AP)(config)# end
(Instant AP)# commit apply
Running Debug Commands
To run the debugging commands from the UI:
1. Navigate to
More > Support
on the Instant main window.
2. Select the required option from the
Command
drop-down list.
3. Select
All Access Points
or
Instant Access Point(VC)
from the
Target
drop-down list.
4. Click
Run
. When you run debug commands and click
Save
, the output of all the selected commands is
displayed in a single page.
The
Support
window allows you to run commands for each access point and VC in a cluster. For a complete list
of commands supported in a particular release train, execute the
show support-commands
command at the
IAP CLI. The output of this command displays the list of support commands that you can run through the UI
and the corresponding CLI commands. For more information on these commands, refer to the respective
command page in the
Aruba Instant 6.5.0.0-4.3.0.0 CLI Reference Guide
.
(Instant AP) # show support-commands
Support Commands
----------------
Description
Command Name
-----------
------------
AP Tech Support Dump
show tech-support
AP Tech Support Dump Supplemental
show tech-support supplemental
AP Provisioning Status
show activate status
AP 3G/4G Status
show cellular status
AP 802.1X Statistics
show ap debug dot1x-statistics
AP Access Rule Table
show access-rule-all
AP Inbound Firewall Rules
show inbound-firewall-rules
AP Active
show aps
AP AirGroup Cache
show airgroup cache entries
AP AirGroup CPPM Entries
show airgroup cppm entries
AP AirGroup CPPM Servers
show airgroup cppm server
AP AirGroup Debug Statistics
show airgroup debug statistics
AP AirGroup Servers
show airgroup servers verbose
AP AirGroup User
show airgroup users verbose
AP ALE Configuration
show ale config
AP ALE Status
show ale status
AP Allowed Channels
show ap allowed-channels
AP Allowed MAX-EIRP
show ap allowed-max-EIRP
AP All Supported Timezones
show clock timezone all
AP ARM Bandwidth Management
show ap arm bandwidth-management
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Monitoring Devices and Logs |
366
