Artemis BP00707, Руководство пользователя

Страница: 54 / 72

54
 At this stage the mission file may now be saved ready for use with Artemis by
clicking on “Save Mission As”. However, we may now wish to customise some of the
marker properties…
 For each marker shown in the “Navigation Markers” list, click on the “Type” and
“Colour” entries to customise how the markers will appear to the diver.
Markers can be chosen to be one of three types…
 Target
Targets should be used to specify points of interest that the
diver may wish to navigate to or be aware of. A choice of
Red, Yellow, Green, Blue and Purple colours are available for
target markers.
 Waypoint Waypoints are used to specify a search path/pattern and can
be either dark or light gray in colour. Optionally, connecting
lines can be shown on the Artemis display to assist the diver
navigating the path.
 Diver Diver markers are normally placed during the dive are
specified as “Diver” type to distinguish them from the pre-
dive “Targets”. However, you may wish to use the different
symbol graphic to identify certain types of targets.
 If required, reorganise the marker order by clicking on a marker entry and using the
“Move Up” and “Move Down” buttons.
 In the example below, the marker types and colours have been customised to show
a navigation path for the diver made up from Waypoints, with known fixed objects
shown in purple, while targets to investigate are highlighted in green – these colour
conventions are arbitrary and up to the diver and dive supervisor to agree upon.
 When done, click “Save Mission As” to save the mission file, then transfer it to
Artemis using the USB cable and method discussed in the Artemis User Manual.