Artemis BP00707, Руководство пользователя

Страница: 22 / 72

22
4.4 Settings Application
The Settings Application allows the diver to control the Artemis operational
parameters.
When the Settings Application is active, the console buttons have the following
functions…
Move Selection Up Previous Value / Execute
Move Selection Down Next Value / Execute
By moving the Selection cursor Up and Down the list, the Diver may choose a
parameter to alter (or sub-menu to enter).
Pressing the Left or Right keys will then cycle through a list of values for the current
parameter, or execute the function selected (such as Start Logging or enter a sub-
menu).
4.4.1 Settings
The top level of the settings list contains the following items…
 Start / Stop Logging – Manually starts or stops a dive (normally the Immersion
sensor would do this if enabled). When a Dive is started, the depth sensor is
zeroed, and recording of a dive log starts.
 Mission – Chooses the current mission file the Navigation Application should use,
see section 4.4.2 below for further details.
 Show Compass – Displays a screen just showing compass information.
 Show GPS – Displays a screen showing the current state of the GPS receiver, and
the satellite availability currently being used to compute its fix. See section 4.4.3
below for further details.
 System Settings – contains controls to allow the real-time-clock to be set, and
hardware configuration selected. See section 4.4.4 below.
 About – Displays a list of system settings, including the serial number of the unit
and the version numbers for its hardware and firmware. See section 4.4.5 below.