Artemis BP00707, Руководство пользователя

Страница: 21 / 72

21
4.3 Choosing a Display (Application)
Once Artemis is powered on, it can perform several tasks to aid the diver, including
showing sonar information, navigational position, distance and bearing to a selected
target and data logging.
To achieve this, Artmeis runs several software applications, or “Apps” (similar to
modern smart-phones). Each application has its own visual display, and different
functions for the four navigation/function buttons on the keypad.
The applications currently installed on Artemis are…
Power
Allows control of power to the attached peripherals (Sonar and GPS), and
shuts down Artemis.
Settings
Provides a menu interface to allow system settings to be adjusted, including
screen brightness, date and time and hardware setup.
Additional GPS diagnostic information and system information can be
displayed.
Sonar
Shows the imagery collected by the sonar, and allows the range and gain
settings to be controlled by the function keys.
Navigation
Shows a chart containing pre-defined ‘mission’ targets and waypoints, the
diver’s position and previous route. The functions keys allow selection of
navigation destinations, chart zoom levels and further targets to be marked.
Dive Profile
Shows a recent history of the depth sensor plus additional information on the
dive duration and current diver depth.
To choose an application…
 First press the “ Power/App ” button to show the application switcher display.
 Repeated presses of the “ Power/App ” button will cycle through the list of available
Apps, in the order shown below…
 When the icon for the desired application is shown, press any of the other four
function buttons to select and switch to its display.
In addition to the title, the Application switcher display shows the actions performed by
the four function buttons within the application, along the bottom of the screen.