Artemis BP00707, Руководство пользователя

Страница: 18 / 72

18
4 USING ARTEMIS
4.1 Turning Power On & Off
Before powering up, ensure that a charged battery has been properly connected to the
display unit as described in the previous sections.
4.1.1 Powering Up
 When Artemis is powered down, the unit may be turned on by a single press to the
central “
Power/App ” button.
 After a few seconds, the Artemis welcome screen will appear and the unit is ready
for use.
4.1.2 Powering Down
 When the unit is turned on, repeatedly press the “ Power/App ” button to cycle
through the applications until the “Power Application” appears…
 Press any button to enter the application…
 Press “ F1/Up ” to choose “Power OFF”
The use of Artemis “Applications” is discussed further in subsequent sections.
4.1.3 Sensor Power (GPS & Sonar)
To save battery life during a mission, power to the two sensor serial ports can be
switched on or off from the “Power Application”.
By default, when Artemis powers up, power to both Serial Ports is also turned on. To
switch off an external sensor, enter the Power Application (as described above), then
select F3/LEFT or F4/RIGHT to toggle power to Serial Ports 1 and 2 respectively.