Artemis BP00707, Руководство пользователя

Страница: 29 / 72

29
4.7 Dive Profile Application
The Dive Profile application shows the recent history of the depth sensor, along with
the current depth reading and the duration of the dive (since the dive was started by
the immersion sensor, or manually selecting “Start Dive” from the settings screen).
When the Dive Profile Application is active, the console buttons have the following
functions…
Zero Depth
Not used
Not used
Not used
4.7.1 Resetting the Depth Sensor
Pressing F1/Up on the Depth display will reset the depth sensor reading to zero for the
divers current depth. Consequently, this function should only be performed at the
surface by the diver if the depth sensor isn’t reading zero.
However, if the Immersion Sensor is enabled (see Settings application), then the depth
sensor will be automatically set to zero when an immersion is detected and a new dive-
log is started.
Manually starting logging (from the Settings application) will not reset the depth sensor
automatically.