Artemis BP00707, Руководство пользователя

Страница: 12 / 72

12
Once the battery has been charged successfully, it can be connected to the Artemis
console with the following steps…
 If the Artemis console already contains a battery, first check the console is turned
off (see the “Turning Power On & Off” section from page 18).
 Dry any excess moisture from around the battery housing to prevent ingress and
contact with the battery pack.
 Unscrew the battery housing cap in the anti-clockwise direction…
As the battery housing is sealed, you may hear the internal pressure equalising with
atmospheric pressure as the seals release. Wait until any pressure equalisation
finishes before completely removing the cap.
When opening or closing the battery cap, hold the bend restrictor in the
orientation shown below to prevent excess strain from being placed on the
cable.
 Check there is not dirt on the o-ring seals inside the battery cap, or around the
inside of the mouth of the battery holder. If necessary, use a lint-free cotton-bud to
wipe clean and apply a small amount of silicone grease.
 Insert the battery pack, feet first, into the battery holder.
 Align the plug on the inside of the battery cap, with the socket on the battery pack
and push together.
 Screw the battery cap in a clockwise direction to secure and seal the battery holder.