Ankara 4P - Arka 4P
English
05060215 00 05-2022
40
Safe handling
(how to
proceed)
•
make sure there are no foreign objects within the handling area
•
always place the lift ing brackets in the indicated points
•
always introduce the brackets completely
•
balance the weight of the cabinet so as to ensure that the load remains bal-
anced (Fig.10)
WARNING! Heavy object. Crushing
Observe the indicati ons regarding safe handling
Dragging. Collapsing/deformati ons/tearing
DO NOT
drag/push the cabinet
DO NOT
use the glass panels for att achment/support/grip
Observe the indicati ons regarding safe handling
i
DO NOT
use transportati on procedures other than those indicated.
13. Storage
Remedy
•
store the cabinets indoors, at a temperature between -25°C and +55°C and an
air humidity between 30% and 90%.
•
before storing the cabinets, check that the packaging is intact and that it does
not show any defects that may compromise preservati on of the cabinets.
What to avoid
UV rays. Permanent deformati on of plasti c materials / damage to cabi-
net components.
DO NOT
store the cabinets in uncovered areas exposed to atmospheric
agents and to direct sunlight.
14. Installati on and environmental conditi ons
DANGER! Live parts. Electrocuti on.
The norms and laws in force must be complied with during installati on and use.
WARNING!
Before carrying out any operati on, take all possible precauti ons to prevent injury to the
operator, use the individual Personal Protecti on Equipment provided (chapter 3).
Installati on is reserved to technicians trained and authorised by the body specifi ed in the
contract (manufacturer/dealer/distributor)
i
-
It is the responsibility of the customer to prepare the installati on area
-
Changes to the set-up described here must be authorized by ARNEG S.p.A.
The cabinet can be delivered packed as follows:
•
with frame in wood fi xed to the base and nylon casing blocked by straps (standard) (Fig.5)
•
with a cardboard casing (on request) (23.2)
•
with wooden crate (on request) (23.1)
The installati on
area should
•
comply with the local standards in force
•
comply with the environmental climati c class (chapter 9)
•
include fl ooring capable of supporti ng the weight of the cabinet
•
a switch with automati c protecti on against short circuits, ground discharges
and dispersions between the electric power line and the machine
•
provide the space required for correct venti lati on, use and maintenance
