Ankara 4P - Arka 4P
English
05060215 00 05-2022
46
CAUTION
!
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT
aim the jet directly at the varnished or plasti cised surfaces
DO NOT
apply the detergents directly onto the surfaces to be cleaned
DO NOT
use steam cleaning equipment
DO NOT
use excessive force
DO NOT
bring the jet too close to the dirt. This may cause injury to the operator and conta-
minate parts that have already been cleaned, as well as the environment.
avoid detergents from coming into contact with nearby products.
CAUTION
!
Floor products. Vapours. Corrosion. Breathing diffi culty.
avoid contact, inhalati on.
23.3
Cleaning of the outer parts (Daily / Weekly)
Clean all external parts of the cabinet every week. See “General instructi ons” chapter 23.2.
23.4
Clean the internal parts (Monthly)
Refer to chapters 23.1 and 23.2 and proceed as follows:
Step
Acti on
1
remove all the products from the cabinet
2
remove all the removable parts, such as display dishes, grid trays, etc.
3
wash with lukewarm water (max 30°C)
4
disinfect using an anti bacterial detergent
5
carefully clean the bott om tray, the drip, and the grid that protects the water drain, eliminat-
ing all foreign bodies that have fallen through the sucti on grid lift ing the plate of the fans
6
carefully dry using a soft cloth
i
Should you noti ce ice built up, call a specialized technician.
23.5
Clean specifi c materials
Material
Remedy
What to avoid
Glass
•
use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
•
immediately remove all traces of
water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
DO NOT
use hot water on cold glass surfaces;
the glass could crack and injure the operator
DO NOT
use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
DO NOT
use dirty cloths
Plasti c
(door seal
profi les)
•
use a cloth soaked in neutral deter-
gent
•
clean with a cloth soaked in clean
water
DO NOT
use waxes, concentrated detergents,
which contain oil, bleach, glass cleaners, abra-
sive detergents or fl ammable fl uids.
Aluminium
•
use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
•
immediately remove all traces of water
or detergent using a dry cloth in order
to prevent marks from forming
DO NOT
use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
DO NOT
use rough or abrasive materials or
metal scrapers that scratch the aluminium
surfaces
DO NOT
use steam cleaning equipment
DO NOT
use dirty cloths