Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 92

Страница: 92 / 195

Steps

Do This

Decide what to do.

Reconnect the receiver to the

transmitter.

a. Place the receiver within 10 feet of the transmitter.
b. Decide what to do next.

• Connect your receiver and transmitter.

• Reconnect your receiver and transmitter.

• Interpret the CM screen.

• Interpret icons on the CM screen.

• Interpret icons on the Main screen.

• Turn the receiver backlight on.

If you want to

Then go to this Step

• For less than 30 minutes.

1. Wait for the connection icon

to disappear

automatically from the display to confirm

connection.

2. Go back to Step 1 of Section 9.

• For 30 minutes or more.

1. Press the RIGHT Option button twice to

display the Main Menu screen.

2. Use the UP/DOWN Arrow button to highlight

System.

3. Press the RIGHT Option button (Select) to

display the System menu with Reconnect

highlighted.

4. Press the RIGHT Option button (Select).
5. Wait for the receiver to beep. If it beeps:

• Twice – the system is connected. Go bac

k to

Step 1 of Section 9.

•

Three times – the system is not connected.

Make sure the battery in the transmitter

is new and ensure that the receiver and

transmitter are linked (see Section 14).

If the receiver has

Then

lost connection

Customer Care: 1-866-597-5520

Section 9

Daily Use

System Menu 08:30A

Reconnect

  Data Upload
  Status
  Link
  Set Date/Time

Main Select

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Похожие инструкции для FREESTYLE NAVIGATOR

Бренды по названию

Популярные бренды

Arkon FREESTYLE NAVIGATOR, Руководство пользователя

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Похожие инструкции для FREESTYLE NAVIGATOR

Бренды по названию

Популярные бренды