Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 48

Страница: 48 / 195

Steps

Do This

End sensor session.

a. Press the RIGHT Option button twice to get to the

Main menu.

b. Press the UP/DOWN Arrow button to highlight System.

c. Press the RIGHT Option button to select System.

d. Press the UP/DOWN Arrow button to highlight Status.

e. Press the RIGHT Option button to select Status.

f. Press the RIGHT Option button to select Removed Sensor.

g. Press the RIGHT Option button to select Yes. The

system now knows you have removed the sensor. If you

are going to replace your sensor now, continue to Step 4.

Reconnect the receiver to

the transmitter.

a. Place the receiver within 10 feet of the transmitter.

b. Press the RIGHT Option button twice to display the

Main Menu screen.

c. Use the UP/DOWN Arrow button to highlight System.

d. Press the RIGHT Option button (Select) to display the

System menu with Reconnect highlighted.

e. Press the RIGHT Option button (Select).

f. Wait for the receiver to beep. If it beeps:

• Twice – The system is connected.

• Three times – The system is not connected. Make sure

the battery in the transmitter is new and ensure that

the receiver and transmitter are linked (see Section 14).

Note: If the transmitter and receiver are connected

properly, the disconnect icon will not appear on

the screen.

Select an insertion site.

Notes:

• Select a site O

NLY on the back of the upper right arm, on

the back of the upper left arm, or on your abdomen.

• Do

NOT insert the sensor where another sensor was just

removed (See “Site Selection” in Appendix A).

• Rotate where you insert your sensor across several sites.

• Avoid areas where the edges of clothing may catch or rub

against the sensor.

• Avoid areas with scars, moles, stretch marks, or lumps.

• Select an area of skin that stays flat during your normal

daily activities (no bending or creasing).

• Avoid areas with excess hair, or consider shaving the area.

• Choose a site that is at least 1 inch away from an insulin

infusion site.

Abdomen
Back of upper arm

Caution:

If the sensor dislodges due to the sensor support

adhesive failing to adhere to the skin, you may get unreliable

or no results. Improper site selection and improper site

preparation may cause poor adherence to the skin.

Customer Care: 1-866-597-5520

Section 5

Insert or Remove Your Sensor

System Menu 08:30A

Reconnect

  Data Upload
  Status
  Link
  Set Date/Time

Main Select

08:30A

No Yes

Did You Remove

The Sensor?

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 48 / 195

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы: