Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 41

Страница: 41 / 195

Steps

Do This

Evaluate the test results.

Compare the test results displayed on the screen to the
range printed on the vial of test strips.

Check your work.

Result:

Control solution test results displayed on the

receiver screen.

You have done this procedure correctly when:

The results are within the normal control solution range.

The used test strips have been discarded properly.

The control solution tests are marked as control

solution tests.

END OF Section 4

If the result

And

Then

• Falls

WITHIN the

range.

➜

Go to Step 8.

• Falls

OUTSIDE of

the range.

You’ve repeated

the test.

Call Customer Care.

You’ve NOT

repeated the test.

Repeat the test from Step 1 with a

NEW test strip.

• Is an error message.

➜

Go to Section 10 on

troubleshooting.

77 – 115 mg/dL

Section 4

Perform a Control Solution Test

Glucose BG 08:30A

Yes No

106

mg/dL

Control Solution?

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 41 / 195

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы: