Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 67

Страница: 67 / 195

OVER

Steps

Do This

Select a test site.

Note 1: Vary the sites from test to test to avoid tenderness
and to avoid creating calluses.
Note 2: Avoid moles, veins, bones, and tendons.

• You are calibrating the system.

Select ONLY a finger for testing (see red

circles).

• You are simply doing a manual

glucose test and NOT calibrating.

Select from among the sites shown

including the circled areas.

Then

Calibration sites

BG Test Site

Caution:

Always calibrate the

system using only a finger-stick
blood sample. Do

NOT

use

alternate site blood glucose
measurements to calibrate the
system. The receiver contains
a built-in FreeStyle® Blood
Glucose Meter for performing
calibration tests.

Caution:

If you have hypoglycemia, or hypoglycemia

unawareness, then test

ONLY

on your fingers.

Section 7

Calibrate Your System/Test Blood Glucose Manually

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 67 / 195

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы: