Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 51

Страница: 51 / 195

OVER

Blue Release Tab

13.

Remove inserter

Steps

Do This

11.

Remove the locking pin.

a. Grasp the top of the locking pin with your thumb and

index finger.

b. Twist the locking pin a 1/4

turn in either direction until
the locking pin clicks.

c. Pull the locking pin away to

remove it.

Note: The sensor support mount adhesive will help
keep the sensor support mount in place.

12.

Insert sensor.

a. Hold the sensor inserter as shown and press down on

both sides of the button at the same time.

Important:

NOT

press on the blue release tabs while

pressing the button on the top of the inserter.

Note: You will feel a slight pinch as the sensor is placed
just under your skin.

a. Hold the sensor inserter and firmly squeeze the two

blue release tabs at the inserter’s base, as you lift the

inserter away from the sensor support mount.

Note: Do NOT lift the inserter without squeezing

the blue release tabs as this may dislodge the sensor

support mount.

Caution:

NOT

press the button until you are ready

to insert the sensor. Doing so may cause unintended

results or injury.

Section 5

Insert or Remove Your Sensor

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 51 / 195

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы: