Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 22

Страница: 22 / 195

What are the Continuous Monitoring mode and Blood

Glucose mode?

Your FreeStyle Navigator system operates in two modes:

Continuous Monitoring mode (Glucose CM).

•

Blood Glucose mode (Glucose BG).

•

Continuous Monitoring Mode (Glucose CM)

The Continuous Monitoring mode is the mode you will use

most of the time. It continuously displays the glucose level in

the fluid in the tiny spaces between your tissues (interstitial

fluid). This glucose reading comes from the sensor you will

place just beneath your skin and is updated every minute.

“Glucose CM” at the top left of the display.

•

The glucose reading is typically accompanied by a

•

directional trend arrow that indicates how fast your glucose

is changing and in what direction.
Most frequently used mode.

•

Measures glucose from interstitial fluid detected by a

•

sensor in your skin.

– Uses a sensor to measure glucose levels.
– A transmitter sends the glucose readings to the receiver.
– Should only be used with FreeStyle Navigator system

Transmitters and FreeStyle Navigator Sensors.

Blood Glucose Mode (Glucose BG)

You will perform traditional blood glucose testing

(BG testing) in the Blood Glucose mode using a FreeStyle

Test Strip and a drop of blood. You can use the Blood Glucose

mode whenever you wish to perform a traditional blood

glucose test. It is also used for calibrating the system. Blood

Glucose mode tests used for calibrating the system can also

be relied on like traditional blood glucose tests.

“Glucose BG

•

” at the top left of the display.

– Built-in FreeStyle Blood Glucose Meter.

Measures glucose from a blood sample that you supply.

•

Uses a FreeStyle Test Strip to measure blood glucose levels.

•

Note: Use ONLY FreeStyle Test Strips and Control Solution.

FreeStyle Lite Test Strips will not work in the receiver.

Other brands of test strips or control solution can give you

inaccurate results.

The system typically works in the Continuous Monitoring mode. It switches to the Blood Glucose mode

when you insert a FreeStyle Test Strip into the receiver’s test strip port. In order to turn the Blood Glucose

mode on, you have to insert the test strip when the receiver is either turned off or when it displays the

glucose screen.

END OF Section 1

Customer Care: 1-866-597-5520

Section 1

Getting Acquainted

Glucose BG

08:30A

106

mg/dL

Home

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 22 / 195

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы: