Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 143

Страница: 143 / 195

Steps

Do This

Link your receiver to your

transmitter.

a. Place the receiver within 10 feet of the transmitter.

b. Press the RIGHT Option button twice to display the

Main menu.

c. Use the UP or DOWN Arrow button to highlight

System.

d. Press the RIGHT Option button (Select) to display the

System menu.

e. Use the UP or DOWN Arrow button to highlight Link.
f. Wait while the receiver searches for the transmitter.

Note: It may take the receiver up to 70 seconds to find

the transmitter.

Result:

The receiver displays the transmitter’s ID number.

Check your work.

Result:

A linked or unlinked transmitter and receiver. You

have done this procedure correctly when:

Your system is linked when you wanted it linked.

Your system is unlinked when you wanted it unlinked.

You called Customer Care after your 2nd attempt to

link failed.

The ID number of the transmitter displayed by the

receiver (under the Transmitter Status menu item)

matches the ID on the transmitter label.

END OF Section 14

• Are the same.

➜

1. Press the RIGHT Option

button (Yes).

Result:

The Main menu is

displayed.

2. Go to Step 4.

• Are

NOT

the same.

1st attempt

Press the Left Option button

(No). The receiver will continue

to search for another transmitter

in the vicinity.

2nd attempt

Call Customer Care.

If the

And this

Then

ID numbers

is your

Verify that the ID

number displayed

on the screen is

the same as the

ID number on the

bottom of your

transmitter.

Caution:

If you accept an incorrect transmitter ID when

linking your Transmitter and Receiver, your glucose

readings will be incorrect.

Section 14

133

Link and Unlink Your Transmitter and Receiver

Link 08:30A

Searching For

Transmitter

Allow 70 Seconds

Cancel

Link 08:30A

Transmitter ID:

AAAF293-80359

located

Is this yours?

Yes

Содержание FREESTYLE NAVIGATOR




































































































































































































Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы:

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 143 / 195

Результаты поиска

Содержание FREESTYLE NAVIGATOR

Отзывы: