manualshive.com logo in svg

Arkon FREESTYLE NAVIGATOR, Руководство пользователя, Страница: 121 / 195

Поделиться
Скачать
Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 121

11

OVER

11 Add Events

Purpose

  To create a record of events that may affect your glucose levels.

Start

 

Do this procedure any time you observe anything that may affect your glucose 
levels, including your state of health and daily activities such as meals, exercise, 
and insulin dosages.

Materials 

•  Your FreeStyle Navigator Receiver.

 

• 

Data and details about the event that you want to record.

Helpful Information

Important:

 To edit an event, go to Section 12, Review Your Reports and Edit Events.

•

  Pressing the RIGHT Option button (Set) completes the entry of your event regardless of how 

much or how little detail you have provided.

•  The current date and time are automatically recorded when you enter an event. If you enter the 

event at a later time, you must change the date and time of the event to when it actually occurred 
before you press the RIGHT Option button (Set) to save the event.

•

 If you change your mind about saving the event, use the UP/DOWN Arrow button to change 

SAVE to CANCEL before you press the RIGHT Option button (Set).

Steps 

Do This

1. 

Access the Add Event screen 

from the Main menu.

Note: If you don’t press any buttons for 12 seconds, the 
receiver screen will go blank and the last change will be 
lost if you haven’t pressed the Select button.

a. Press the UP Arrow button or the DOWN Arrow 

button to highlight Add Event.

b. Press the RIGHT Option button (Select) to go to 

the Select Event screen.

 

Section 11 

111

 

 

Add Events 

Main                                       08:30A
  Glucose
  Alarms
  Reports
  System
 

Add Event

 

                 

                                           Select

Содержание FREESTYLE NAVIGATOR




































































































































































































Отзывы:

Нет отзывов