Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 131 | Manualshive

Страница: 131 / 195

Arkon FREESTYLE NAVIGATOR Скачать руководство пользователя страница 131

OVER

Steps

Do This

6.

Select the desired statistical

reading.

Note: Statistics include ONLY continuous glucose results.
Glucose readings that were taken in the Blood Glucose mode
are NOT included in the statistics.
a. Use the UP Arrow button or DOWN Arrow button

to highlight the statistic you want to review

for the

selected period

.

b. Press the LEFT Option button (Next) to view other periods.

Note: You can view reports for 1, 3, 7, 14, 21, or 28 day
periods, in that order.

c. Press the RIGHT Option button (Back) to return to the

Select Reports screen.

d. Go to Step 2 to determine what to do next.

•

Your highest glucose reading.

Highest CM.

•

Your lowest glucose reading.

Lowest CM.

• Your average glucose reading.

Ave. CM.

• How well you are maintaining your

levels near the average value.

Std. Dev.

Note: A small number indicates that

most of your glucose readings are

close to your average value. A large

number indicates that many of your

glucose levels vary considerably from

your average value.

• The percentage of readings that are

above your high glucose target.

Above Target.

• The percentage of readings that are

within your glucose targets (between

the high and low targets).

Within Target.

• The percentage of readings that are

below your low glucose target.

Below Target.

• The average number of low glucose

alarm events per day.

Low/Day.

• The average number of high glucose

alarm events per day.

High/Day.

• The average number of projected low

alarm events per day (early warnings).

Proj Low/Day.

• The average number of projected high

alarm events per day (early warnings).

Proj High/Day.

If you want to know

Then highlight

Section 12

121

Review Reports and Edit Events

«
...
129
130
131
132
133
...
»

Содержание FREESTYLE NAVIGATOR




































































































































































































Отзывы:

Нет отзывов