Arjo Huntleigh Sonicaid Team3 USA Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 84

background image

67

Instructions For Use

EN

3. Enter the Settings Management screen.

4. Touch the

button to copy the current language Easinotes to the

USB

Flash Drive.

5. Exit the menu and remove the USB flash drive.

Customising Easinotes

1. Contact Huntleigh Service and get a link to download the Easinotes Editing tool.
2. Install the tool and run it. (See image below).

3. Open the Easinotes.hcf file

on the USB Flash Drive,

exported from your Team3.
4. On the left of the tool is

shown each of the Categories

(See section 5.3.6.).
The buttons below allow new

categories to be created, other

categories to be deleted and their

relative positions changed in the list.

5. On the right of the tool is shown each of the notes for the selected Category. The buttons below allow new

notes to be created, other notes to be deleted and their relative positions changed in the list.
6. At the bottom of the tool, the 2 text boxes allow the selected Category or Note to be edited. These text

boxes allow text in any Windows language to be used, so for instance, a full set of French notes could be

assembled.

7. When editing is complete, save your work, overwriting the original file.

Importing Easinotes

1. With Team3 switched on, plug the USB flash drive containing your edited Easinotes.hcf file into one of the

Team3 USB sockets.
2. Team3 must already be set up to operate in the language of your choice. This will ensure that the Easinote

file to be imported is saved with the other files for that language.

3. Enter the Settings Management screen.

4. Touch the

button to copy the Easinotes file from the USB Flash Drive.

5. Exit the menu and remove the USB flash drive.
6. If possible, send the Easinotes.hcf file that you are now using to Huntleigh so that it can be included in later

software releases.

«
...
65
66
67
68
69
...
»

Содержание Huntleigh Sonicaid Team3 USA





















































































Отзывы:

Нет отзывов

Похожие инструкции для Huntleigh Sonicaid Team3 USA

Бренд: Landis+Gyr Страницы: 10

Бренд: Oldham Страницы: 22

Бренд: National Instruments Страницы: 15

Бренд: Oakton Страницы: 16

Бренд: YOSensi Страницы: 27

Бренд: Palstar Страницы: 37

Бренд: LD Didactic Страницы: 2

Бренд: National Instruments Страницы: 12

Бренд: ELGO Electronic Страницы: 24

OPERA CONTROL CENTER SERVER - V 3.5

Бренд: OPTICOM Страницы: 21

Бренд: Aethra Страницы: 2

Бренд: Flymaster Страницы: 7

Бренд: Sonel Страницы: 26

Бренд: Aventics Страницы: 23

Бренд: Autonics Страницы: 6

Бренд: LaserLiner Страницы: 14

Бренд: Parker Страницы: 24

Бренд: Datcon Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды