ARIS Tensor Zone 2/22, Руководство пользователя

Страница: 33 / 44

33 Tensor
9.2 Confi gure function
Set DIP-switch
Component damage by short-circuit.
The DIP switches 1-2 and 3-4 switch to the same outputs. If the DIP switches 1 and 2 or the
DIP switches 3 and 4 are ON during operation, a short circuit can destroy components.
− Do not set DIP 1 and 2 to ON at once
− Do not set DIP 3 and 4 to ON at once
Via DIP 1-2 (1) the actual value output will be confi gured. Via DIP 3-4 (2) the set value input will be confi gured.
Shut down supply voltage, set DIP-switches:
DIP Actual value output
1 ON / 2 OFF 0...10 V
1 OFF / 2 ON 0...20 mA
9.3 Operation
9.3.1 Operation and display elements
Menus
Menus are only given in set-up operation in order to set parameters and values. The function of a menu item arises from an
abbreviation consisting of two letters, e.g.: end position left:
E . L
determine left end position
Parameter values
The segment display is able to indicate values from 0 up to 100. The value 100 is displayed as a ring across both segments.
0 . 0 .
...
9 . 9 . ( . ) .
Fault message
The controller indicates faults while operation through permanent blinking of an error code. For details concerning the error codes
see chapter 13.1.
CAUTION