Argus PiCUS Tree Motion Sensor Online Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 83

background image

PiCUS TMSO Manual

7

3 General Information

This chapter deals with general information and provides a rough overview of the components,
structure and functions of the PTMSO.

3.1 Intended use

PiCUS tree measurement technology offers tree experts a comprehensive set of diagnostic
tools for the detection and evaluation of defects on trees. To assess the stability of a tree, the
PiCUS TreeQinetic pulling test and the PTMS 3 / PTMSO are suitable methods for measuring
the root plate inclination in in-depth tree inspections.

The PTMSO is designed to measure and monitor 2 different types of events on trees:



short term inclination movements/vibrations of trees (mainly inclination due to wind

events), which typically have a duration of a few seconds



vibrations transmitted through the ground into the tree or directly mechanically

introduced into the tree

The system is theoretically able to measure such events on other objects besides trees.
However, the hardware, the internal data filtering, as well as the analysis and evaluation of the
data in the supplied PC software is specifically designed for the application on trees. The
results can therefore not be transferred to other objects without restrictions!

Please also note 3.2 Disclaimer!

Due to the measuring technique, the system is

not

suitable for reliable measurement of long-

term changes in inclination.

When using the system, the permissible ambient conditions described under

must be observed. Otherwise a faultless function of the system cannot be

guaranteed.

3.2 Disclaimer

Using the PTMSO on other objects than trees may damage the PTMSO, its components or
the object. The measurement results of the PTMSO require interpretation by qualified experts.

Conclusions about the condition of the tree, derived from the measurement data and analyses
generated by the PTMSO, are the sole responsibility of the person drawing the conclusion.
Neither the manufacturer of the PTMSO nor the seller can be held liable for consequences
arising from the application of the PTMSO.

If the measurements of the PTMSO show large inclinations which suggest that the tree
is felled, other test methods (e.g. PiCUS TreeQinetic pulling test) must be used in any
case to confirm the measurement result.

All technical specifications are subject to change without notice.

«
...
5
6
7
8
9
...
»

Содержание PiCUS Tree Motion Sensor Online




















































































Отзывы:

Нет отзывов

Похожие инструкции для PiCUS Tree Motion Sensor Online

Бренд: VEE GEE Страницы: 2

Бренд: Harley Benton Страницы: 28

Бренд: Raycus Страницы: 40

Бренд: RaycoWylie Страницы: 31

Бренд: Yamaha Страницы: 31

Бренд: Mini Страницы: 20

Бренд: Hameg Страницы: 40

Бренд: Hanna Instruments Страницы: 11

Photo Set Strato S-20

Бренд: Fisso Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Hameg Страницы: 6

Бренд: TA ENGINEERING Страницы: 22

Class 3400 Meter

Бренд: E-Mon Страницы: 20

Victoreen 07-494

Бренд: Fluke Biomedical Страницы: 34

Бренд: JPT Страницы: 19

Бренд: Benning Страницы: 30

Бренд: Xylem Страницы: 26

Бренд: Delphin Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды