3-50
4. Install the countershaft gear onto the countershaft
and secure with a snap ring (flat-side away from
the gear).
5. Using rubber bands to support the connecting rods,
carefully install the crankshaft assembly into the
crankcase.
GZ330
NOTE: It will be necessary to rotate the crank-
shaft back and forth to engage the teeth of the oil
pump and countershaft gears.
6. Install the driveshaft; then with a flat washer on
each end of the reverse idler assembly, install into
the crankcase.
GZ332
GZ333
7. Install the gear shift shaft into the crankcase mak-
ing sure the flat washer is in place on the gear shift
position switch end and the bearing assembly on
the gear shift stop end.
GZ334A
GZ335
8. Place two flat washers on the drive gear end of the
countershaft and one flat washer on the high driven
gear end; then with shift forks and shift fork shaft,
install the countershaft assembly into the crankcase.
GZ280A
GZ336
9. Engage the shift forks into the gear shift shaft and
push the shift fork shaft into the crankcase.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
