3-12
GZ126A
GZ162
GZ132A
4. Remove the cap screw on the end of the tensioner;
then using a screwdriver, turn the tensioner clock-
wise to remove the tension. Remove the two cap
screws securing the tensioner adjuster assembly
and remove the assembly. Account for a gasket.
GZ200
5. Using an awl, rotate the C-ring in its groove until
it is out of the cylinder head; then remove the
C-ring.
NOTE: Care should be taken not to drop the
C-ring into the crankcase.
GZ155
6. Bend the washer tabs down and remove the two
cap screws securing the sprocket to the camshaft;
then drop the sprocket off the camshaft.
GZ154A
7. While holding the chain, slide the sprocket and
camshaft out of the cylinder head.
CC266D
NOTE: Loop the chain over the cylinder head
and secure it to keep it from falling into the crank-
case.
8. Remove the five nuts securing the cylinder head to
the cylinder; then remove the four cylinder head
cap screws and washers.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
