6-12
CC892
6. Install the shift fork assembly making sure the fork
leg is facing upward. Apply a small amount of oil
to the gasket; then install the gasket.
CC893
7. Place the input shaft housing assembly onto the
gear housing; then secure with the existing cap
screws. Tighten to 23 ft-lb.
NOTE: If a new gear housing is being installed,
tighten the cap screws to 25-31 ft-lb.
CD103
CD110
8. Install the proper shim onto the ring gear spider
assembly making sure the chamfer side of the
shim is facing toward the ring gear. Install the ring
gear in the housing; then install the outside shim
with the chamfer side of the shim toward the ring
gear.
NOTE: The spider and ring gear assembly must
be replaced as a complete unit.
CC896
CC897
9. Assemble the fork and sliding collar into the cover
assembly; then install left bearing flange/bearing
assembly and seat it firmly into the cover.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
