Arctic Cat 08 ATV, Руководство по обслуживанию

Страница: 146 / 162

8-3
8
CD762
7. Remove two cap screws securing the upper steer-
ing post bearing to the frame. Account for two
bearings and two housings.
CD760
8. Using a suitable lift stand, raise the ATV enough
to remove the front wheels.
CD685
9. Remove the cotter pins and lock nuts from the
inner and outer tie rod ends; then remove the tie
rods from the steering post arm and the left-side
and right-side steering knuckles.
AF778D
KX039
10. Remove two cap screws securing the lower steer-
ing post bearing flange to the frame; then remove
the steering post.
AL600D
CLEANING AND INSPECTING
„
NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is
necessary.
1. Wash the tie rod ends in parts-cleaning solvent.
Dry with compressed air. Inspect the pivot area for
wear. Apply a low-temperature grease to the ends.
2. Inspect the tie rods for damaged threads or wear.
! WARNING
Always wear safety glasses when using compressed
air.
Back to TOC Back to Section TOC
Next Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com