Arbiter Systems 931A, Руководство по эксплуатации

Страница: 138 / 161

Sets Date and Time for the real-time clock. Time is always set to standard
time. Use the #DAY command to adjust for daylight saving time.
yyyy = Year
mm = Month
dd = Day
hh = Hour
mm = Minute
ss = Second
A.3.49 Timer Configuration, Set or Return (TCF)
Command:
d#,f#,h#,at#,bt#,s/r#TCF
Returns or sets the parameters necessary for timer operation.
d# Display f# Function
0 Seconds 0 Time A to B
1 Cycles (50Hz) 1 Time A for X Counts
2 Cycles (60Hz) 2 Time width of A
3 Cycles (Ch1 Hz) 3 Frequency of A
4 Count A Events
5 Count A events gated by B
h# Hold mode on stop
0 Disable
1 Enable
at# A Trigger bt# B Trigger
0 DC Applied 0 DC Applied
1 DC Removed 1 DC Removed
2 AC Applied 2 AC Applied
3 AC Removed 3 AC Removed
4 Contact Open 4 Contact Open
5 Contact Closed 5 Contact Closed
s/r# Set or Return Value
0 Set Value 1 Return Value
A.3.50 Transducer Display (TDU)
Command:
TDU
Displays Transducer Quantities as set up using transducer configuration
(COT). Starts transducer operation.
122