Arbiter Systems 931A, Руководство по эксплуатации

Страница: 59 / 161

3.3.4.1 Display
Use the DISPLAY key to view the main display for the timer; this includes
the time measurement, the timer function and trigger modes. An example
is shown below.
In the main timer display, FUNCTION shows the parameter that the
timer is configured to measure. TRIGGER A and TRIGGER B describe
the actions, which will constitute valid triggers for the “A” and “B” inputs.
3.3.4.2 Config
Press the CONFIG key to display the timer configuration menu, which
appears as follows:
One or more sub-menus follow each of the menu selections, which allow
configuration of the specific functions.
Section 3.7 provides more detailed information about the timer sub-
menus and their functions.
3.3.4.3 Arm/Reset
Use the ARM/RESET key to arm and reset the active timer. Once
stopped, pressing the ARM/RESET key will reset the timer. Pressing it
a second time arms the timer for next cycle. The ARM/RESET function
may also be used to manually stop the timer during a measurement cycle.
43