Arbiter Systems 931A, Руководство по эксплуатации

Страница: 139 / 161

A.3.51 Timer Display (TIM)
Command:
TIM
Displays the Timer results in seconds, cycles, counts, or Hertz on the Model
931A, according to the timer function. The Timer must be configured
using the TCF command. Once the Timer has been configured, it may be
armed using the TAM command. Displays the accumulated time after a
valid trigger condition.
A.3.52 Timer Reading, Return (TMR)
Command:
TMR
Returns the Timer reading.
Response: Numeric ASCII string.
A.3.53 Timer, Reset (TRS)
Command: TRS
Resets the Timer to prepare for a new timing cycle. NOTE: Arm the Timer
before starting the timing cycle (either via front panel ARM/RESET key,
or the RS-232C TAM command).
A.3.54 Timer, Stop (TSP)
Command: TSP
Stops the Timer.
A.3.55 Timer, Start (TST)
Command:
TST
Activates the Timer. Arm the Timer prior to starting a timing cycle (either
via front panel ARM/RESET key, or the RS-232C TAM command).
A.3.56 Volts/Amps Display (V A)
Command:
#V A
# Result
0 (or absent) Displays Channel 1 and 2 measured ampli-
tude values
1 Tabular Display
2 Volt hours, Amp hours
123