APP APP-601 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 146

APP APP-601 Скачать руководство пользователя страница 26

Installation Overview

3-2

3.1 Installation Types

Three types of installations are possible:



Centralized



Distributed



Turn-key

Centralized Installation

A centralized installation is used when the recorder chassis are installed in the same panel/cabinet or in
close proximity to each other. Close proximity would be within 40’ (even longer with special discussions
with the factory). A centralized installation will generally consist of a computer control chassis and one or
more data chassis. In this type of installation, there is typically only one satellite clock IRIG-B input. 1PPS
signals are daisy chained from chassis to chassis.

Distributed Installation

A distributed installation is used when the recorder chassis are installed in panels/cabinets that are greater
than 40’ apart or even in separate buildings. A distributed installation will generally consist of a computer
control chassis and several data chassis. All chassis must connect back to the system Ethernet switch. The
chassis should not be greater than 100 meters from the Ethernet switch if straight Ethernet is used. Longer
distance can be achieved with Ethernet boosters or by using fiber optic interfaces or using the company
network. One or more IRIG-B signals can be used.

Turn-Key Installation

The most common installation type is a turn-key installation. APP Engineering, Inc. mounts and wires the
chassis, and other associated components, in a customer specified panel/cabinet. All work is completed at
the APP factory and a complete turn-key cabinet is delivered to the customer.

*WARNING*

Only qualified, service-trained personnel who are aware of the
hazards involved should install, open any doors, remove any covers,
or disconnect the instrument (APP-601 Recorder). Disconnect power
before attempting any installation, service or maintenance.

See Safety Notices on page v for more very important, must read,
safety information.

Please call APP Engineering, Inc. at 317-536-5300 with any installation
or service questions. Installation service is available by APP
Engineering, Inc. Please call the number above for additional
information

.

«
...
24
25
26
27
28
...
»

Содержание APP-601



















































































































































Отзывы:

Нет отзывов