APP APP-601 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 146

APP APP-601 Скачать руководство пользователя страница 2

ii

© 2009-2017 by APP Engineering, Inc. All rights reserved

No part of this manual may be reproduced in any form or by any means (including electronic storage and
retrieval or translation into a foreign language) without prior agreement and written consent from APP
Engineering, Inc. as governed by the United States and international copyright laws.

Manual Part Number

APP00161

Edition

Edition 9, September, 2017
Printed in USA
APP Engineering, Inc.
5234 Elmwood Avenue
Indianapolis, IN 46203

Assistance

Product maintenance agreements and other customer assistance agreements are available for APP
Engineering, Inc. products. For assistance, contact APP Engineering, Inc. at 317-536-5300. Further
information is available on the APP Engineering, Inc. website at

www.appengineering.com

Trade Information

Windows is a registered trademark of Microsoft Corporation. All other brand and product names are
trademarks or registered trademarks of their respective companies.

Warranty

The material contained in this document is provided “as is,” and is subject to being changed, without
notice, in future editions. Further, to maximum extent permitted by applicable law, APP Engineering, Inc.
disclaims all warranties, either expressed or implied with regard to this manual and any information
contained herein, including but not limited to the implied warranties of merchantability and fitness for a
particular purpose. APP Engineering, Inc. shall not be liable for errors or for incidental or consequential
damages in connection with the furnishing, use, or performance of this document or any information
contained herein. Should APP Engineering, Inc. and the user have a separate agreement with the warranty
terms covering the material in this document that conflict with these terms, the warranty terms in the
separate agreement will control.

Technology License

The software described in this document is furnished under license and may be used or copied only in
accordance with the terms of such license.

«
1
2
3
4
...
»

Содержание APP-601



















































































































































Отзывы:

Нет отзывов