Ansul AUTOPULSE IQ-301, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 196

About This Manual Scope of this Manual
10 IQ-301 PN 50036:F 10/29/2001
About This Manual
Scope of this Manual
This manual contains the following:
Section 1 “System Overview” provides a description of the control panel and system
components, a list of related system documentation, electrical specifications, and
cabinet dimensions.
Section 2 “Installation” provides instructions for installing the basic and optional
system components, and provides a checklist for testing an installed system and the
batteries.
Section 3 “Programming” provides instructions for customizing the fire alarm system
by selecting and setting program options for addressable SLC devices, NACs, and
Panel Circuits.
Section 4 “Operation” provides instructions for operator use of the fire alarm system.
Appendix A “Power Supply Calculations” provides current draws for system
components and calculation tables for determining the power required to operate the
control panel during fire alarm and AC loss of power conditions.
Appendix B “NFPA Applications” provides information and wiring diagrams for
setting up the control panel for NFPA applications.
Appendix C “Annunciators” provides information about annunciating control panel
points and contains instructions and wiring diagrams for connecting annunciators to the
control panel.
Appendix D “Releasing Applications” provides information and wiring diagrams for
setting up the control panel for releasing applications.
Appendix E “Combination Fire/Burglary Applications” provides information and
wiring diagrams for setting up the control panel for security applications.
Appendix F “Wire Requirements” provides wire requirements for circuits connected to
the control panel.
Appendix G “Pre-Alarm (AWACS™) Applications” provides information and wiring
diagrams for setting up the control panel for AWACS™ applications.
Appendix H “Special Zones” provides descriptions and options for Special Zones used
to define presignal and PAS selections, Time Control selection, Holiday selections, and
NAC Code Types.
Appendix I “Terminal Interface Protocol” provides detailed information about the
terminal operating modes: Local Terminal Mode (LocT), Local Monitor Mode (LocM),
and Remote Terminal Mode (RemT). The appendix also contains instructions for using
a CRT-2 for Read Status and Alter Status (Change Status) operations.
Appendix J “Expansion Power Supplies” provides information and wiring diagrams for
setting up the panel to use external power supplies.
Appendix K “UL Power-limited Wiring Requirements” provides UL wiring
requirements and sample wiring diagrams for power-limited and nonpower-limited
wiring.
Appendix L “U.S. Coast Guard & Lloyd’s Register” provides a list of equipment
suitable for use in marine and shipyard applications as compatible with this control
panel.