Ansul AUTOPULSE IQ-301, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 196

Notes, Cautions, and Warnings About This Manual
IQ-301 PN 50036:F 10/29/2001 11
Appendix M “CBE Programming” provides information and programming examples to
set up the fire alarm system to use Control-by-Event.
Appendix N “External Battery Charger” provides information and wiring diagrams for
setting up an external battery charger for use with the panel.
Notes, Cautions, and Warnings
This manual contains notes, cautions, and warnings to alert the reader to as follows:
•
Note
– Supplemental information for a topic, such as tips and references, that
typically appear in the left margin.
• Caution – information about procedures that could cause programming errors,
runtime errors, or equipment damage.
• WARNING – indicates information about procedures that could cause irreversible
damage to the control panel, irreversible loss of programming data or personal
injury.
Typographic Conventions
For presentation and printing, this manual uses different typeface characters, in place of
the actual LCD letters that you see on the LCD display. This manual uses the following
conventions for entering data and pressing control panel keys, as listed in Table 1:
Table 1 Typographic Conventions in this Manual
General Terms
Unless noted, general terms reference the specific part numbers listed Table 2:
Table 2 General Terms
!
!
When you see Specifies Example
text in small caps the way the text
appears in the
LCD display
MARCH TIME
is a selection that
appears in the LCD display
TAMPER
shows a Type Code
selection as it appears in the
LCD display
text in quotes a reference to a
section “Program Change” specifies the
Program Change section.
bold text In body text, a key
on the control
panel Press the Enter key
Press the 1 key
a graphic of the key In a graphic, a key
as it appears on
the control panel
Press
General Term Specific Part Number(s)
Auxiliary Power Supply APS-6R
AVPS-24 AVPS-24/AVPS-24E
Control module FCM-1
CPU IQ-301 circuit board
CRT CRT-2
LCD display 80-character LCD (liquid crystal display)
Monitor module FMM-1 or FMM-101
PRN PRN-5
Relay module FRM-1