Ansul AUTOPULSE IQ-301, Инструкция по установке, эксплуатации и обслуживанию

Страница: 173 / 196

Using the CRT-2 for Alter Status Terminal Interface Protocol
IQ-301 PN 50036:F 10/29/2001 173
I.3.6 View the History Buffer
From the Read Status menu, select History-Step, option 4 . This option lets you step
through the history buffer one event at a time:
Step through the history buffer one event at a time by pressing the Next (F5) or Prior
(F6) function keys.
I.3.7 Send the History Buffer to the CRT-2
From the Read Status menu, select History-All, option 5 . This option sends the entire
history buffer to the CRT-2, from most recent event to oldest event:
I.4 Using the CRT-2 for Alter Status
I.4.1 Overview
This section shows how to do Alter Status functions, Table 66, from a CRT-2.
Table 66 Alter Status Functions
SYSTEM RESET 3:17A Fri 08/20/97
4W
The first line that appears displays the
most recent event in the history buffer.
Press
Press
%
to scroll forward
through the history buffer.
Press
^
to scroll back
through the history buffer.
****************************** EVENT HISTORY START***************************
ALARM: HEAT(ANALOG) DETECTOR ADDRESS 55 ZONE 55 3:10A 04/20/97 D55
ALARM: SMOKE(PHOTO) DETECTOR ADDRESS 29 ZONE 01 3:15A 04/20/97 D29
ACKNOWLEDGE 3:16A Fri 04/20/97
SYSTEM RESET 3:17A Fri 04/20/97
******************************* EVENT HISTORY END ***************************
5W
Most recent event
Press
Function Lets you...
Disable Enable or disable detectors, modules, or NACs.
Sensitivity Change the sensitivity of any addressable detector in the system.
Clear Verification Clear the verification counter for all the addressable detectors in the
system.
Clear History Clear the contents of the history buffer.
Set Action/Alert Set the Pre-Alarm for the Alert or Action level.