Ankom TDF, Руководство оператора

Страница: 27 / 78

Operator’s Manual
Rev A 4/30/12 pg. 27
13. Rinse the IDF filter bags with acetone.
After the instrument has completed an IDF process the IDF residue that has been collected in the IDF bag must be
manually rinsed twice with acetone. It is recommended that you use an ANKOM TDF51 Rinse Stand (sold separately) for
rinsing filter bags with acetone.
To rinse the IDF filter bags with acetone using the ANKOM TDF51 Rinse Stand, follow the steps below.
13.1 Remove the IDF bags from the instrument.
13.2 Place the bags on the Rinse Stand by sliding the back part of each bag under the pinch mechanism. Keep the top
of the bag open.
13.3 Using a wash bottle, squirt acetone into each bag, making sure that all residue is rinsed down into the filter.
13.4 Repeat step 13.3 so that each bag gets rinsed a total of two times.
13.5 Allow acetone to evaporate from the bags.
Hazardous Materials –
Do NOT heat seal or place bags in an oven until all
acetone has evaporated.
13.6 With your Heat Sealer set between 3 and 4, press the Heat Sealer arm down for 3 to 4 seconds to seal each bag
just above the filter. This keeps all residue contained to the filter area while handling the bags.
13.7 Place each bag in the Drying Rack.