Ankom TDF, Руководство оператора

Страница: 19 / 78

Operator’s Manual
Rev A 4/30/12 pg. 19
7.3 Place a labeled and weighed SDF bag up underneath the SDF Delivery Nozzle so that the Delivery Nozzle is
inside the top part of the bag. Pull the bag up so that the top of the bag is about 35 mm above the top of Clamp
Bar C and return the Delivery Nozzle to its original position. This will hold the back of the bag in place.
As part of normal operation, solution from the IDF bag will flow into the SDF bag.
Therefore, when installing the SDF filter bags it is very important to position them
high enough vertically so that at least 20 mm (0.75 inches) of the filter part of the
IDF bag can fit inside the top of the SDF bag.
7.4 With the bag being held by the Delivery Nozzle, center it horizontally between the lines on the back part of
Clamp Bar C.
7.5 Repeat steps 7.2 – 7.4 for all six stations.
7.6 Re-install Clamp Bar D.
7.7 Flatten the bags to remove any wrinkles. With fingers away from the clamp bars, press the Clamp Bar D button
on the control panel to pinch the bags just above the filter.
8. Add DE to the SDF filter bags on the ANKOM
TDF
Dietary Fiber Analyzer.
8.1 Open the top of the SDF bag and add a weigh tin of DE to the bag by folding the tin and then dipping it down into
the bag below the tip of the Delivery Nozzle.
When adding DE to the filter bags it is very important to keep it below the tip of
the Delivery Nozzle so that the DE material can be properly rinsed.
Centering Lines