ANALOX Ax60+ Multi-Gas, Руководство по обслуживанию

Страница: 5 / 62

Ax60+ Multi-Gas
Service Manual
Int. Approved
Document ref: P0159-803-11 September 2019 Page 5 of 62
Copyright © 2015 Analox Ltd. All Rights Reserved.
Commercial in Confidence
1 Introduction
This Service Manual explains how to service and calibrate the Ax60+. It is intended for system installers and service
engineers. For information on installation and operation, refer to the Ax60+ User Manual P0159-800, downloadable from
Analox .
1.1 Warnings, Cautions and Notes
WARNINGS ARE USED IN THIS MANUAL TO INDICATE POTENTIALLY HAZARDOUS SITUATIONS
WHICH COULD RESULT IN SERIOUS INJURY OR DEATH.
CAUTIONS ARE USED IN THIS MANUAL TO INDICATE POTENTIALLY HAZARDOUS SITUATIONS
WHICH COULD RESULT IN EQUIPMENT DAMAGE OR LOSS OF DATA.
NOTES ARE USED IN THIS MANUAL TO INDICATE SUPPLEMENTARY INFORMATION THAT IS NOT
HAZARD RELATED.
1.2 Safety information
WARNING: READ THE SAFETY INFORMATION IN THIS MANUAL BEFORE SERVICING THE AX60+.
WARNING: DO NOT TEST THE ALARM WHEN IT IS CLOSE TO THE EARS. IT HAS A HIGH VOLUME
SOUNDER WITH A SOUND LEVEL OF 88 DECIBELS AT A DISTANCE OF 3 METRES.
WARNING: DO NOT TEST THE ALARM WHEN IT IS CLOSE TO THE EYES. IT HAS A HIGH VISIBILITY
STROBE LIGHT WITH A LUMINOUS INTENSITY OF 100 CANDELA.
WARNING: DO NOT OPEN THE CENTRAL DISPLAY, SENSORS OR ALARMS IF THEY ARE CONNECTED
TO THE POWER SUPPLY. FIRST DISCONNECT AND ISOLATE THEM FROM LIVE HAZARDOUS
VOLTAGE.
1.3 Other information
NOTE: THE DATA OUTPUT MODULE DOES NOT REQUIRE ANY ON-SITE SERVICING, HOWEVER,
THE DATA OUTPUT MODULE DOES CHECK FOR A NUMBER OF FAULT CONDITIONS, SEE SECTION
11.2 FOR DETAILS ON FAULT INDICATIONS