ANALOX Ax60+ Multi-Gas, Руководство по обслуживанию

Страница: 41 / 62

Ax60+ Multi-Gas
Service Manual
Int. Approved
Document ref: P0159-803-11 September 2019 Page 41 of 62
Copyright © 2015 Analox Ltd. All Rights Reserved.
Commercial in Confidence
8.4.5 Relay 1 on fault (Displayed as Rly 1 on fault)
1] Press and hold Cycle for at least 6 seconds. Then press Cycle five times to display
Central Config.
2] Press Accept/Test, then press Cycle four times, press Accept/Test to display the Rly 1 on fault ?
screen
3] Press Cycle to toggle Y or N, then press Accept/Test to confirm.
4] Press Cancel repeatedly to return to system status screen
8.4.6 Relay 2 on fault (Displayed as Rly 2 on fault)
1] Press and hold Cycle for at least 6 seconds. Then press Cycle five times to display
Central Config.
2] Press Accept/Test, then press Cycle five times, press Accept/Test to display the Rly 2 on fault ?
screen
3] Press Cycle to toggle Y or N, then press Accept/Test to confirm.
4] Press Cancel repeatedly to return to system status screen