ANALOX Ax60+ Multi-Gas, Руководство по обслуживанию

Страница: 16 / 62

Ax60+ Multi-Gas
Service Manual
Int. Approved
Document ref: P0159-803-11 September 2019 Page 16 of 62
Copyright © 2015 Analox Ltd. All Rights Reserved.
Commercial in Confidence
4.3 List Alarm descriptions (Displayed as List Alrm descs)
4.3.1 List Alrm descs (CO
2
example)
The Top-level Menu, List Alrm descs option enables you to view read-only information about the alarm descriptions
configured for each Sensor.
NOTE: THE List Alrm descs OPTION PROVIDES READ-ONLY INFORMATION THAT CAN NOT BE
CHANGED. IF YOU NEED TO SET UP OR CONFIGURE THE ALARM SETPOINTS, USE THE Top-level
menu, Sensor Config, Alrm set-pnts OPTION.
1] To display the Top-level Menu List Alrm descs option, press and hold down the
Cycle buttons for at least 6 seconds. Then press the Cycle button twice.
2] Press Accept/Test to go to the Select Sensor screen, this displays the CO2 Sensors and
highlights Sensor 1
3] Press Cycle to highlight other sensors
4] Press Accept/Test to select the sensor that you want to view alarms on, then press Cycle to
cycle through the alarms
5] Press Cancel to exit the Alarm screen and return to Select another sensor or press Cancel to
return to the Top-level Menu, List Alrm descs