AMX Modero CV7, Руководство по эксплуатации/справочник

Страница: 78 / 220

Configuring Communication
66 7" Modero Touch Panels
12.
Within this on-screen WEP Passphrase keyboard (FIG. 66), enter a character string or word (such as
AMXPanel ) and press Done when you have finished.
 As an example, enter the word AMXPanel using a 128-bit hex digit encryption. After
pressing Done , the on-screen Current Key field displays a long string of characters (separated
by colons) which represents the encryption key equivalent to the word AMXPanel.

This series of hex digits (26 hex digits for a 128-bit encryption key) should be entered as
the
Current Key into both the WAP and onto other communicating Modero panels by
using the WEP Key dialog (FIG. 67).
13.
Write down this Current Key string value for later entry into your WAP’s WEP Key field ( typically
entered without colons ) and into other communicating panel’s Current Key field (FIG. 67).
14.
If you are entering a Current Key generated either by your target WAP or another Modero
panel
, within the WEP Keys section, touch the Key # button to launch the WEP Key # keyboard
(FIG. 67), enter the characters and press Don e when finished.

This Key value corresponds to the Default WEP Key number used on the Wireless Access
Point and selected in the Default Key field described in the previous step.
The code key generator on Modero panels use the same key generation formula.
Therefore, this same Passphrase generates identical keys when done on any
Modero because they all use the same Modero-specific generator. The Passphrase
generator is case sensitive.
FIG. 66 WEP Passphrase Keyboard
FIG. 67 WEP Key # Keyboard