AMX Modero CV7, Руководство по эксплуатации/справочник

Страница: 67 / 220

Configuring Communication
55 7" Modero Touch Panels
3.
Select Settings > Master Communication Settings , from the Main menu to open the Master
Communication Settings dialog (FIG. 56).
4. Click the Communications Settings button to open the Communications Settings dialog.
5.
Click on the NetLinx Master radio button ( from the Platform Selection section ) to indicate that you
are working as a NetLinx Master.
6.
Click on the Virtual Master radio box ( from the Transport Connection Option section ) to indicate
you are wanting to configure the PC to communicate directly with a panel. Everything else such as
the Authentication is greyed-out because you are not going through the Master’s UI.
7.
Click the Edit Settings button ( on the Communications Settings dialog ) to open the Virtual NetLinx
Master Settings dialog (FIG. 56).
8. From within this dialog enter the System number (default is 1 ).
9.
Click OK three times to close the open dialogs, save your settings, and return to the main NetLinx
Studio application.
10.
Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System.
The default System value is one .
11.
Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the
list.
The panel will not appear as a device below the virtual system number (in the Online Tree tab)
until both the system number used in step 8 for the VNM is entered into the Master Connection
section of the System Settings page and the panel is restarted.

The Connection status turns green after a few seconds to indicate an active USB connection to
the PC (Virtual Master). No Lock icon is displayed because this USB connection is not
secured (
requiring a username/password ).
FIG. 56 Assigning Communication Settings for a Virtual Master
IP Address of computer
(not needed as this is a
direct USB connection)