![background image](http://html1.mh-extra.com/html/amx/dgx-aie/dgx-aie_hardware-reference-manual_2939028156.webp)
Dante Audio Switching Boards
156
Enova Digital Media Switchers - Hardware Reference Manual
Dante Audio Switching Board Numbering Overlays
The Enova DGX 6400 can hold up to four Dante Audio Switching Boards (two in the lower input-side expansion board slots
and two in the upper output-side expansion board slots). The Dante ASBs in the top of the enclosure work in conjunction
with the Input Boards; the Dante ASBs in the bottom of the enclosure work in conjunction with the Output Boards.
Overlays are provided to simplify Dante ASB connector wiring on Enova DGX 100 Series enclosures (FIG. 69):
Applying Dante ASB Overlays to Numbering Plates
1.
Check the labels on the overlay to determine which system it applies to (see table below).
2.
Peel the backing off the overlay and discard the backing.
3.
Align the overlay carefully on the numbering plate then press firmly on the overlay to set the adhesive on the
numbering plate.
4.
Repeat Steps 1 through 3 as necessary for any remaining overlays.
Dante Audio Switching Board Overlay Placement
FIG. 69
Dante Audio Switching Board slot numbering overlays on Enova DGX 6400
Enclosure
Audio Switching Board Numbering Overlay Placement
Enova DGX 800
Inputs 9-16, Outputs 9-16
Vertical numbering plate (rear center) - at bottom
Enova DGX 1600
Inputs 17-24, Outputs 17-24
Vertical numbering plate (rear center) - at bottom
Enova DGX 3200
Inputs 33-40, Outputs 33-40
Horizontal numbering plate (rear top) - at left / right ends
Enova DGX 6400
Inputs 65-80, Outputs 65-80
Vertical numbering plate (rear center) - at top / bottom
Dante Audio Switching Board
Numbering Overlays