![background image](http://html1.mh-extra.com/html/amx/dgx-aie/dgx-aie_hardware-reference-manual_2939028193.webp)
System Configuration Interface
193
Enova Digital Media Switchers - Hardware Reference Manual
On-Screen Display
Image Adjustments
Video Settings - Display Settings
Video Mute
Click the check box to mute the video
Video Freeze
Click the check box to freeze the video
Test Pattern
In the drop-down list, select Off, Color Bar, Gray Ramp, SMPTE Bar, HiLo Trak, Pluge, or X-Hatch
Blank Color
In the drop-down list, select Black or Blue
Allow Display Sleep Click the check box to allow the display to go to sleep after the specified time in seconds in the "Display Sleep
Delay(s)" field
Display Sleep
Display(s)
Enter the delay in seconds that the display will remain awake after the video route has been disconnected or the
input signal is removed.
Note: While most monitors handle the sleep function well, some monitors continually attempt to wake up, resulting in
constant or intermittent screen blanking when no video is present. For the video output attached to the
problematic monitor, either uncheck the Allow Display Sleep option and set the Blank Color or set
VIDOUT_SLEEP-
DISABLE
and
VIDOUT_BLANK-<color>
FIG. 107
On-Screen Display
Video Settings - On-Screen Display
Enable OSD
Click check box to enable/disable
OSD Color
In the drop-down list, select Black, Blue, White, or Yellow
OSD Position
In the drop-down list, select Top Left, Top Right, Bottom Left, or Bottom Right
FIG. 108
Image Adjustments
Video Settings - Image Adjustments
Brightness
Use the slider bar to adjust (range: 0 to 100)
Contrast
Use the slider bar to adjust (range: 0 to 100)