System Configuration Interface
196
Enova Digital Media Switchers - Hardware Reference Manual
Compression
Outputs Only - General
Levels & Delay
FIG. 112
Compression
Audio Settings - Compression
Buttons at top
Click Off, Low, Medium, High, or Custom.
Note: When in Low, Medium, or High, changes to any of the other Compression settings will
automatically change the Compressor mode to Custom.
Threshold
Use the slider bar to adjust (range: 0 to -60).
Attack (ms),Release (ms),Ratio
Adjust the values in the boxes (either enter values or use the arrows)
FIG. 113
Audio Settings - Outputs Only - General
Audio Settings - Outputs Only - General
Encoding
PCM (read only)
Output Format
click Stereo or Mono.
Note: Setting this option to "Mono" audio on the output results in the left and right channels being combined and
sent to both the left and right output channels equally.
Test Tone Enable
click Disable or Enable.
Test Tone
Generator
from the drop-down list, select Off, 60Hz, 250Hz, 400Hz, 1kHz, 3kHz, 5kHz, 10kHz, Pink Noise, or White Noise.
Audio Routing
click Embedded or Switched.
Note: With Audio Switching Boards in the system, Audio Routing defaults to Switched.
FIG. 114
Levels & Delay
