![background image](http://html1.mh-extra.com/html/amx/dgx-aie/dgx-aie_hardware-reference-manual_2939028123.webp)
DXLink Twisted Pair 4K Input and Output Boards
123
Enova Digital Media Switchers - Hardware Reference Manual
DXLink Twisted Pair 4K Input and Output Boards
Overview
This chapter pertains to Enova DGX DXLink™ Twisted Pair 4K Input and Output Boards:
FG1061-570 Input board
FG1061-580 Output board
NOTE:
For full capability, DXLink Twisted Pair 4K Boards must be used in conjunction with DXLink Twisted Pair 4K Transmitters
and Receivers. Additional compatibility is available between DXLink Twisted Pair 4K equipment and DXLink Twisted Pair
equipment (see the "DXLink Compatibility" Appendix in the "DXLink Twisted Pair 4K Transmitters and Receivers Hardware
Reference Manual" at www.amx.com).
By default, DXLink 4K Input Boards provide a 4K EDID to all connected DXLink Transmitter devices. While DXLink Transmitters
are supported by the DXLink 4K Input Board, the default EDID provided to the Transmitter may result in a source device
(computer, media player, etc) presenting a video resolution out of the Transmitter's range.
To ensure the source device presents a resolution the DXLink Transmitter can support, simply use the Enova DGX 100 Series
System Configuration interface to select a non-4K EDID (All, Wide, Full in non-4K range) to ensure a supported format is
requested by the DXLink Transmitter. For information about compatibility between DXLink Twisted Pair 4K and endpoints,
see the
DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual
at www.amx.com.
Signal Routing
DXLink Twisted Pair 4K Input Boards route signals to DXLink Twisted Pair 4K Output Boards or to any other type of Enova
DGX Output Boards. DXLink Twisted Pair 4K Output Boards can also accept signals from all of the other types of Enova
DGX Boards. When routing signals between different board types, the Enova DGX Switcher automatically converts the
signal format to match the output board.
Signals that can be sent over DXLink Twisted Pair 4K Boards include: HDMI, DVI-D, analog video, analog audio, digital
audio, and embedded audio. DXLink Twisted Pair 4K Boards also work in conjunction with Audio Switching Boards (see
page 171) or Audio Insert/Extract Boards (see page 183).
IMPORTANT:
Because the DXLink, DVI, and HDMI Boards in the Enova DGX Switcher normally produce a quality image,
you will not need to make adjustments or custom scaler settings unless the installation has special scaling, EDID, or HDCP
requirements (if adjustments are necessary, use the System Configuration interface; see page 127).
NOTE:
Enova DGX DXLink Twisted Pair 4K Boards do not support CEC.
FIG. 47
DXLink Twisted Pair 4K Input and Output Boards
Enova DGX Enclosure Support for DXLink Twisted Pair 4K Input and Output Boards
DGX 800
Enova DGX 800 enclosures can hold up to four DXLink Twisted Pair 4K Boards with four RJ-45 inputs or outputs per board.
Each enclosure holds a maximum of two input and two output boards, accommodating connector configurations up to a
maximum of 8x8, as well as three subsets (i.e., 4x4, 4x8, or 8x4).
DGX 1600
Enova DGX 1600 enclosures can hold up to eight DXLink Twisted Pair 4K Boards with four RJ-45 inputs or outputs per board.
Each enclosure holds a maximum of four input and four output boards, accommodating connector configurations up to a
maximum of 16x16, as well as subsets (e.g., 16x8 or 4x12).
DGX 3200
Enova DGX 3200 enclosures can hold up to sixteen DXLink Twisted Pair 4K Boards with four RJ-45 inputs or outputs per board.
Each enclosure holds a maximum of eight input and eight output boards, accommodating connector configurations up to
a maximum of 32x32, as well as subsets (e.g., 12x24 or 32x8).
DGX 6400
Enova DGX 6400 enclosures can hold up to thirty-two DXLink Twisted Pair 4K Boards with four RJ-45 inputs or outputs per
board. Each enclosure holds a maximum of sixteen input and sixteen output boards, accommodating connector
configurations up to a maximum of 64x64, as well as subsets (e.g., 12x48 or 52x8).
Enova DGX DXLink Twisted Pair 4K Boards
feature a 4K label beside the IN or OUT
label.