4K60 HDMI Input & Output Boards
83
Enova Digital Media Switchers - Hardware Reference Manual
Enova DGX 4K60 4:4:4 HDMI Input Board - Specifications
DGX-I-HDMI-4K60 (FG1061-542) - Specifications
GENERAL
Compatible AMX Products
Supported enclosures are Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure built after June 1,
2016
Regulatory Compliance
See Enova DGX Digital Media Switcher Enclosure for regulatory compliance
HDMI w/HDCP
DESCRIPTION
Compatible Formats
HDMI 1.X, HDMI 2.0, HDCP 1.X, HDCP 2.2, DVI
Signal Type Support
HDMI, Disp+ (Input Only)
DVI-D (Single Link With HDMI Cable Adapter)
Video Data Rate (Max)
When used with compatible Enova DGX 100 series enclosures*: 18 Gbps (Max)
Video Pixel Clock (Max)
When used with compatible Enova DGX 100 series enclosures*: Up to 600 MHz
Progressive Resolution Support
When used with compatible Enova DGX 100 series enclosures*: 480p up to 4096x2160 @ 60Hz, 4:4:4
Interlaced Resolution Support
480i, 576i, 1080i
NOTE: If input is interlaced, all scaled outputs will de-interlace video to a progressive resolution format. If
non-scaled output board or if scaler is in Bypass mode, interlaced input will pass through unaltered.
4K Resolution Support (Max)
When used with compatible Enova DGX 100 series enclosures*:
• 3840x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 4096x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 3840x2160p @ 50/60 Hz, 4:2:0**
• 4096x2160p @ 50/60 Hz, 4:2:0**
** Supported by DX-RX-4K when in Bypass Scaling mode.
HDMI Cable Requirement
Premium Certified High Speed Cable Category 2, Recommended.
HDMI High Speed Cable Category 2, Required
Input Equalization
Adaptive up to 21ft (7m). Cable distance support dependent on cable quality and signal format
Input Re-clocking (CDR)
Yes
Deep Color Support
24-bit, 30-bit***, 36-bit***
***30-bit and 36 bit are only supported in CTA-861 formats. When switched to an output board or RX with
Scaling support the Scaler must be in Bypass mode.
HDR Support
Yes, HDR10 with ST.2084 EOTF
Output signal follows input format
Note: Requires the use of HDR compatible output board such as 4K60 HDMI Output Board
Color Space Support
sRGB, BT.601, BT.709, BT.2020
RGB 4:4:4 , YCbCr 4:4:4, 4:2:2, and 4:2:0
• Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4 on scaled
output
• Output signal follows input format on non-scaled output boards
• If 4:2:0 is switched to a 4K RX the RX scaler must be set to bypass
3D Format Support
• Frame Packing 1080p up to 24 Hz
• Frame Packing 720P up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
Note: If scale is present on corresponding output board or the RX it must be set to Bypass mode
Audio Format Support
• Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS-HD Master Audio, DTS, 2 CH through
8 CH L-PCM
• Dolby Digital and DTS support up to 48 kHz, 5.1 channels
Audio Resolution
16 bit to 24 bit
Audio Sample Rate
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Local Audio Support
Yes, extraction of 2 CH L-PCM selectable by channel
Audio Switching Board &
Dante Audio Switching
Support
• Supports break-away audio switching of 2 CH L-PCM for all channels
• Supports down-mix from one input channel of Dolby True-HD, Dolby Digital, DTS-HD, DTS, or 2 to 8
channel L-PCM
Note: Down-mix supported on 4K video inputs with pixel clocks up to 297 MHz
(up to 4096x2160p@30 Hz)
DDC/EDID Support
• EDID provided by Enova DGX Digital Media Switcher to the digital (HDMI) port input and includes
presets
• EDID is user re-programmable
HDCP Support
• Yes, including HDCP 1.x and HDCP 2.x for full matrix HDCP support (includes any input to any or all
outputs)
• HDCP 2.2 support required by input/output board for passage of HDCP 2.2 premium content
• Key Management System
• AMX HDCP InstaGate Pro™ Technology
• Key support up to 31devices per output
